|
WATER-BASED EPOXY CLEAR PRIMER/SEALER |
|
|
PRODUCT NUMBER |
No.1030CP |
|
TYPE |
Two pack type clear primer based on water-borne epoxy binder and special hardener. |
|
USES |
The primer is suitable for cement wall, cement products, cement borad, plasterboard, and conrete wall etc. |
|
CHARACTERISTICS |
1. Excellent resistance to water and alkali. 2. Hard film and good adhesion. 3. Excellent compatibility with epoxy and PU topcoat. |
|
COLOR |
Yellowish clear |
|
S.G. |
Above 0.9 kg/L (Mixer) |
|
VISCOSITY (25 ℃) |
50~65 KU (Mixer) (25 ℃) |
|
DRYING TIME (25 ℃) |
Set-to-touch 4 hrs. Dry hard 12 hrs. Full Cured 7 days |
|
OPTIMUM FILM THICKNESS |
Wet 40μ（microns） Dry 15μ（microns） |
|
OVERCOATING INTERVALS (25℃) |
Min. 14 hrs. (25 ℃) |
|
THEORETICAL COVERAGE |
24.6㎡/L 90.0 ㎡/Gal |
|
MIXER RATE |
Base：hardener. ＝ 25：75 |
|
NON-VOLATILE CONTENT |
Above 35％ (Mixer) |
|
POT LIFE |
1.25 hrs. (Mixer, 25 ℃) |
|
THINNER |
Water |
|
THINNING RATE |
0~5% (Excluded cleaning tools) |
|
STORAGE SHELF LIFE |
Minimum 1 year under normal storage conditions. |
|
APPLICATION METHOD |
Air-spray, Brush. |
|
NOTE |
1. Mix base and hardener according to the mixing ratio and stir thoroughly. 2. Adhered moisture, grease, and dirt on substrate must be cleaned thoroughly. 3. Avoid applying the paint in rainy weather or humidity above 85% RH, particularly, a wet surface must be thoroughly dried. 4. All tools must be cleaned immediately after use. |
|
|
|
|
 |
|
|
|
