RAINBOW C.R. TAR PAINT
PRODUCT NUMBER |
No.1455 |
TYPE |
Anti-corrosive paint based on Chlorinated Rubber, refined Coal Tar and aluminum pigment. |
USES |
Anti-corrosive under coat for ship bottom and bottom areas, especially suitable for the pipes of under floor. |
CHARACTERISTICS |
1. Very fast drying with very good adhesion. 2. Very good weather resistance. 3. Very good resistance to seawater. 4. Though and flexible. 5. Good resistance to galvanic action. 6. Relatively low cost. |
APPLICATION METHOD |
Brush, Roller, Airless Spray. |
COLOR |
Black or Reddish Silver |
FINISH |
Flat |
HILDING POWER |
Above 20 m2/L |
SPECIFIC GRAVITY |
Above 1 kg/L |
VISCOSITY (25℃) |
60 - 80 KU |
DRYING TIME (25℃) |
Set-to-touch 1 hr. Dry hard 3 hrs. |
OVERCOATING INTERVALS (25℃) |
Min. 4 hrs. Max. 4 months. |
OPTIMUM FILM THICKNESS |
Wet 105 microns (4.2 mil) Dry 50 microns (2.0 mil) |
VOLUME SOLIDS |
Above 60% |
THEORETICAL COVERAGE | 9.5 m2/L 9.5 m2 /KG 36 m2/Gal |
THINNER | RP-71 PCR Thinner |
THINNING RATE | 0 - 5% (by wt.) |
PRECEDING COATS |
No.908/1021 |
SUBSEQUENT COATS |
Protective C.R. A/F |
STORAGE SHELF LIFE |
Minimum 1 year under normal storage conditions. |
NOTE | 1. Before application, stir paint evenly.
When paint is too thick, thinner can be added
within specified quantity 2. Moisture, grease, rust, dirt and loose paints film on substrate must be removed, so are the corrosive salt particles. As a result, paint performance can be ensured. 3. Application should avoid the following environment: rainy day; substrate is damp by dew; temperature is above 40 or below 10. 4. Subsequent coat has to wait until paint films of preceding coat completely dry off. |
|
|