|
|
EPOXY PRIMER, WHITE |
|
PRODUCT NUMBER. |
1002 |
|
TYPE |
A two-pack, white primer based on epoxy resin and hardener with titanium dioxide. |
|
USES |
Used for concrete walls and machinery equipments |
|
CHARACTERISTICS |
1. Tough and hard film, rich flexible and adhesion. 2. Excellent resistance to water and sea water. 3. Excellent resistance to oils, solvents and chemicals. 4. Excellent abrasion resistance. 5. Can smooth the rough surface of concrete. |
|
FINISH |
Flat |
|
COLOR |
White |
|
HIDING POWER |
Above 5 ㎡/L （mixture） |
|
MASS DENSITY |
Above 1.45Kg./L （mixture, 25℃） |
|
VISCOSITY |
70~ 90 KU (mixture) |
|
DRYING TIME |
Set-to-touch 1 ½ hrs. Dry hard 6 hrs. Fully cured 7 days. (25℃) |
|
OPTIMUM FILM THICKNESS |
Wet 100 microns Dry 40 microns |
|
THEORETICAL COVERAGE |
38.0 ㎡/Gal 10.0 ㎡/L 7.76 ㎡/Kg. |
|
OVERCOATING INTERVALS |
Min. 8 hrs. Max. 60 days (25℃) |
|
MIXING RATIO |
Base : hardener = 92 : 8 (by wt.) |
|
NON-VOLATILE CONTENT |
Above 70% (mixture) |
|
POT LIFE |
8 hrs. (mixture, 25℃) |
|
HEAT RESISTANCE |
Continuous 93℃ Intermittent 121℃ |
|
THINNER |
No.1005 Epoxy Thinner（SP-12） |
|
THINNING RATE |
5~10% (cleaning tools excluded) |
|
SUBSEQUENT COATS |
Epoxy, PU, CR or Vinyl system |
|
STORAGE SHELF LIFE |
Minimum 1 year under normal storage conditions. |
|
APPLICATION METHOD |
Brush, Airless spray, Roller and Air spray. |
|
NOTE |
1. Mix base and hardener according to the mixing ratio and stir thoroughly then keep static about 10~20 minutes before use. 2. Adhered moisture, grease, dirt, dust, rust and corrosion salts on substrate must be removed thoroughly. 3. Avoid applying the paint in rainy weather or humidity above 85% RH, particularly a wet surface must be thoroughly dried. 4. All equipment must be cleaned immediately after use. 5. When used inside tanks, sufficient ventilation must be provided. |
|
|
|
|
 |
|
|
|
