|
EPOXY CLEAR, SOLVENTLESS |
|
|
PRODUCT NUMBER |
1014 |
| TYPE | A two-pack, solventless clear paint based on solventless epoxy resin and hardener. |
|
USES |
Used for cement wall, cement pipelines, cement products, storage tank lining and plant floor to resist acids and alkalis. |
|
CHARACTERISTICS |
1. Tough and hard film with very good adhesion. 2. Excellent resistance to oils, water, sea water. 3. 200µ pinhole-less paint film with one coat. 4. Excellent resistance to mechanical damage. 5. Outstanding resistance to acids and alkalis. |
|
COLOR |
Translucent liquid |
|
MASS DENSITY |
Above 1.0 Kg/L (mixture) |
|
VISCOSITY |
Paste (mixture, 25℃) |
|
DRYING TIME |
Set-to-touch 6 hrs. Dry hard 18 hrs. Fully cured 7 days (25℃) |
|
OPTIMUM FILM THICKNESS |
Wet 225 microns Dry 200 microns |
|
THEORETICAL COVERAGE |
16.6 ㎡/Gal 4.4 ㎡/L 4.4 ㎡/Kg |
|
OVERCOATING INTERVALS |
24 hrs. |
|
MIXING RATIO |
Base : hardener = 65 : 35 (by wt.) |
| NON-VOLATILE CONTENT | Above 95% (mixture) |
|
THINNER |
No.1005 Epoxy Thinner (SP-12) (only cleaning tools) |
| STORAGE SHELF LIFE | Minimum 1 year under normal storage conditions. |
| APPLICATION METHOD | Trowel, Brush |
|
NOTE |
1. Mix base and hardener according to the mixing ratio and stir thoroughly. 2. Adhered moisture, grease, dirt, dust, rust and corrosion salts on substrate must be removed thoroughly. 3. Avoid applying the paint in rainy weather or relative humidity exceeded 85%, particularly a wet surface must be thoroughly dried. 4. All equipment must be cleaned immediately after use. 5. The surface of cement wall or cement products must be thoroughly dried then can be applied. 6. When overcoating interval is exceeded, paint surface must be roughened to ensure adhesion. 7. The paint film exposed to the sun for a long-term does have yellowing phenomenon that is without affect the quality of paint film. (Separated twice applying is not recommended.) |
|
|
|
|
 |
|
|
|
