WATER-BASED EPOXY CLEAR PRIMER / SERLER
|
PRODUCT NUMBER |
1030CP |
|
TYPE |
A two pack, water-based clear paint based on water-based epoxy resin and special hardener. |
|
USES |
Used for cement walls, cement products, cement boards, Gypsum boards and concrete brick walls etc to resist water and alkalis. |
|
CHARACTERISTICS |
1. Excellent resistance to water and alkalis. 2. Tough and hard film with good adhesion. 3. Very good compatible with solvent type or solventless type of epoxy paints or PU paints. |
|
COLOR |
Yellowish transparent |
|
MASS DENSITY |
Above 0.9 Kg/L (mixture) |
|
VISCOSITY |
50~65 KU (mixture, 25℃) |
|
DRYING TIME |
Set-to-touch 4 hrs. Dry hard 12 hrs. Fully cured 7 days (25℃) |
|
OPTIMUM FILM THICKNESS |
Wet 40 microns Dry 15 microns |
|
THEORETICAL COVERAGE |
94.6 ㎡/Gal 25.0 ㎡/L |
|
OVERCOATING INTERVALS |
Min. 14 hrs. (25℃) |
|
MIXING RATIO |
Base : hardener = 25 : 75 |
|
NON-VOLATILE CONTENT |
Above 35% (mixture) |
|
POT LIFE |
Within 30 minutes (mixture, 25℃) |
|
THINNER |
Tap water |
|
THINNING RATE |
0~5% (cleaning tools excluded) |
|
STORAGE SHELF LIFE |
Minimum 2 years under normal storage conditions. |
|
APPLICATION METHOD |
Airless Spray, Brush, Roller |
|
NOTE |
1. Mix base and hardener according to the mixing ratio and stir thoroughly. 2. Adhered moisture, grease, dirt and dust on substrate must be removed thoroughly. 3. Avoid applying the paint in rainy weather or relative humidity exceeded 85%. 4. All equipment must be cleaned immediately after use. |
|
|
|
|
 |
|
|
|
