WATER-BASED CATALYZED EPOXY COATING
|
PRODUCT NUMBER |
1030FM |
|
TYPE |
A two pack, high performance coating based on outstanding weather and chemicals resistant water-based resin, pigment and additives. |
|
USES |
Used for cement structures and steel substrates, such as food plants, petrochemical plants, hospital etc to resist contamination, weather and chemicals and toxic-free. It is more suitable to be use for the fire retardant paints. |
|
CHARACTERISTICS |
1. Very good contamination resistance. 2. Very good weather resistance. 3. Resist chemicals to splash. 4. Water as thinner, no fire dangers and non-toxic. 5. Used for fire retardant paint FM-900 with excellent antifungal effect. 6. Used for fire retardant paint FM-900 with good adhesion. |
|
FINISH |
Flat, semi-gloss |
|
COLOR |
Light color series |
|
MASS DENSITY |
Above 1.05 Kg/L (mixture) |
|
VISCOSITY |
80~115 KU (mixture) |
|
DRYING TIME |
Set-to-touch 2 hrs. Dry hard 10 hrs. Fully cured 14 days (25℃, RH=60%) |
|
OPTIMUM FILM THICKNESS |
Wet 125 microns Dry 50 microns |
|
THEORETICAL COVERAGE |
30.0 ㎡/Gal 8.0 ㎡/L |
|
OVERCOATING INTERVALS |
Min. 18 hrs. |
|
MIXING RATIO |
Marked on the drums |
|
NON-VOLATILE CONTENT |
Above 40% (mixture) |
|
POT LIFE |
Above 24 hrs. (mixture, 25℃) |
|
THINNER |
Tap water |
|
THINNING RATE |
0~5% (cleaning tools excluded) |
|
PRECEDING COATS |
Concrete: No.410-1 Emulsion Primer No.420 Water-based Elastomeric Sealer No.1030CP Water-based Epoxy Clear Primer / Sealer Galvanized steel: No.500P Galvanized Steel Emulsion Paint Steel: No.1035 Water-based Epoxy Aluminum Tripolyphosphate Primer Fire retardant paint: EP-66(60µ) + FM-900(depending on size of steel beams) + 1030FM(50µ) Spray-applied fire resistive material: Indoor: EP-66(60µ) + F-1 (depending on size of steel beams) + 1030FM(50µ) Outdoor: EP-66(60µ) + F-100 (depending on size of steel beams) + 1030FM(50µ) |
|
STORAGE SHELF LIFE |
Minimum 2 years under normal storage conditions. |
|
APPLICATION METHOD |
Airless Spray, Brush, Roller |
|
NOTE |
1. Mix base and hardener according to the mixing ratio and stir thoroughly. 2. Adhered moisture, grease, dirt and dust on substrate must be removed thoroughly. 3. Avoid applying the paint in rainy weather or relative humidity exceeded 85%. 4. Since without the stable glue time, so please follow the pot life when applying. |
|
|
|
|
 |
|
|
|
