| EPOXY DECK COMPOUND | |
|
PRODUCT NUMBER |
1072 (EP-16) |
|
TYPE |
A three-pack special compound based on epoxy resin hardener and colored quartz sand. |
|
USES |
Used for deck and floor to resist heavy duty, acids and alkalis. |
|
CHARACTERISTICS |
1. Dense, abrasion and load resistance. 2. Excellent resistant to acids and alkalis. 3. Excellent adhesion with the steel decks and floors. 4. No cracking under heavy load. 5. Excellent heat insulation. |
|
FINISH |
Smooth abrasion resistant and coarse non-slip surface |
|
COLOR |
Red Oxide and Green |
|
MASS DENSITY |
Above 1.1 Kg/L (resin mixture) |
|
DRYING TIME |
Set-to-touch 3 hrs. Dry hard 12 hrs. Fully cured 7 days. (25℃) |
| OPTIMUM FILM THICKNESS | Wet 11 m/m (440
mil) Dry 10 m/m (400 mil) |
| THEORERICAL CCOVERAGE | 18.0 Kg/㎡ |
| OVERCOARING INTERVALS | Min. 8 hrs. Max. 2 days (25℃) |
|
MIXING RATIO |
Base : Hardener : Sand = 19.7 : 6.4 : 73.9 (by wt.) |
|
POT LIFE |
30 minutes (mixture, 25℃) |
|
THINNER |
No.1005 Epoxy Thinner (SP-12) (only for cleaning tools) |
|
THINNING RATE |
Never blend in thinner |
|
PRECEDING COATS |
No.1006 Epoxy Zinc Rich Primer (EP-03) No.1007 Epoxy Red Lead Primer (EP-01) No.1009 Epoxy Red Oxide Primer (EP-02) |
|
STORAGE SHELF LIFE |
Minimum 1 year under normal storage conditions. |
|
APPLICATION METHOD |
Manual troweling |
|
NOTE |
1. Mix base, hardener and colored quartz sand according to the mixing ratio and blend thoroughly. 2. Avoid applying compound in rainy or humid weather, and a wet surface must be thoroughly dried before troweling. 3. All equipment must be cleaned immediately after use. 4. When overcoating interval is exceeded, paint surface must be roughened to ensure adhesion. 5. For non-slip surface , one additional coat of No.1071 Epoxy Resin Non-Slip Desk Paint must be applied. |
|
|
|
|
 |
|
|
|
