EPOXY UNDER WATER PRIMER |
|
PRODUCT NUMBER |
No.1087P |
TYPE |
A two-pack corrosion preventive coating based on special epoxy resin and hardener. |
USES |
Used for coast and harbor facilities, or for the steel of the underwater area. |
CHARACTERISTICS |
1. Can easy brush to steel in water with good adhesion. 2. Brushing have good shear strength suitably, blasting steel under water have good wetting and adhesion. Coating can be cured under water, it doesn’t be washed away by seawater. 3. Hard and tough film with excellent abrasion resistance, excellent resistance to water. 4. 400 microns of dry film can be obtained by one coat brush. |
APPLICATION METHOD |
Brush |
COLOR |
Gray |
FLASH POINT |
Above 100℃ |
SPECIFIC GRAVITY |
Above 2.2 Kg/L (mixture) |
VISCOSITY |
10000~15000 cps(25℃) |
DRYING TIME |
Set-to-touch 2 hrs. half dry 4 hrs. Dry hard 6 hrs. Fully cured 7days (25℃) |
OVERCOATING INTERVALS |
Min. 3 hrs. Max 3 days. |
OPTIMUM FILM THICKNESS |
WFT: 365 (microns) DFT: 350 (microns) |
THEORETICAL COVERAGE |
0.8 ㎡/Kg @ 350 um |
THINNER |
No.1005 Epoxy Thinner (SP-12) (Only for tools cleaned) |
PRECEDING COATS |
No.1087 Epoxy Under Water Coating |
MIXING RATIO |
Base : hardener = 90 : 10 (by wt.) |
POT LIFE |
40 minutes (mixture, 1Kg/25℃) |
ADHESION |
Brush on blasting steel on water: above 30Kg/cm2 Brush on blasting steel under water: above 12Kg/cm2 |
STORAGE SHELF LIFE |
Minimum 1 year under normal storage conditions. |
NOTE |
1. Mix base and hardener according to the mixing ratio and stir thoroughly. |
2. The coating surface attach halobios easily under water, all halobios must be cleaned thoroughly when brush on the second day, or it may affect adhesion.
3. Brushing with short bristle brush have good shear strength and wetting effect under water.
4. Pot life is 40 minutes (mixture, 1Kg/25℃), mixing too much may have bad construction.