POLYURETHANE CLEAR COATING (NN-TYPE)
| PRODUCT NUMBER | 713 |
| TYPE | A two-pack, non-yellowing polyurethane clear coating based on acrylic resin and polyol resin with isocyanate hardener. |
| USES | Used for wood products and metal products, such as furniture, musical instruments, handicrafts, sports equipment etc. |
| CHARACTERISTICS | 1. High gloss and hardness, good gloss and color retention. 2. Excellent adhesion with wood and metal products. 3. Excellent resistance to acids, alkalis, oils and salts. 4. Excellent resistance to abrasion and heat. |
| APPEARANCE | Transparent liquid |
| MASS DENSITY | Above 1.0 Kg/L (mixture) |
| VISCOSITY | 55~80
KU (mixture, 25℃ ) |
| DRYING TIME | Set-to-touch 1
hr. Dry hard 6 hrs. (25 ℃) |
| OPTIMUM FILM THICKNESS | Wet 70 microns Dry 25 microns |
| THEORETICAL COVERAGE | 54.1
 /Gal 14.3 m2/L 14.1 m2/Kg |
| OVERCOATING INTERVALS | Min. 4 hrs. Max. 6 months |
| MIXING RATIO | Base : hardener = 70 : 30 (by wt.) |
| NON-VOLATILE CONTENTS | Above 40% (mixture) |
| POT LIFE | 4
hrs. (mixture, 25℃ ) |
| THINNER | No.736 Polyurethane Thinner |
| THINNING RATE | 5~20% (cleaning tools excluded) |
| PRECEDING COATS | No.711 Polyurethane Sanding |
STORAGE SHELF LIFE | Minimum 1 year under normal storage conditions. |
| APPLICATION METHOD | 1.Spray 2.Brush/Roller (only for hand-type) |
| NOTE | 1. Mix base and hardener according to the mixing ratio and stir thoroughly. 2. Adhered moisture, grease, dust on substrate must be removed thoroughly. 3. Please
use special thinner for dilution to avoid causing bubbles or pinholes. 4. Hardener cover must be tightly closed to avoid reaction with moisture in air to form bubbles and gelation. 5. Mixture of base and hardener must be used up within pot life. 6. Strictly controlling application, not to exceed 50 microns per coat, to avoid bubbles formation. 7. All equipments must be cleaned immediately after use 8. The
lacquer sanding is not suitable as a primer for this paint. 9. If change application method from airless spray to brush or roller, please advice our sales representative. 10. Avoid applying paint in rainy or the moisture above 85% RH, otherwise the adhesion will be affected by moisture of substrate and the paint film will be loss its gloss. |
|
|
|
|
 |
|
|
|
