|
POLYURETHANE COATING, GOLDEN |
||
|
PRODUCT NUMBER |
738 |
|
|
TYPE |
A two-pack, non-yellowing polyurethane coating based on acrylic resin, polyol resin and isocyanate hardener with weather resistant pigment |
|
|
USES |
Used for cement products of temple. |
|
|
CHARACTERISTICS |
1. High gloss with smooth appearance. 2. Excellent weather resistance with gloss and color retention. 3. Excellent resistance to acids, alkalis, oils and salts. |
|
|
4. Excellent adhesion hardness and abrasion. |
||
|
COLOR |
Golden yellow |
|
|
HIDING POWER |
Above 5.0 m2 |
|
|
MASS DENSITY |
Above 0.9 Kg/L (mixture) |
|
|
VISCOSITY |
65~85 KU (mixture, 25℃ |
|
| DRYING TIME | Set-to-touch 1 hr. Dry hard 6 hrs. (25  ℃) |
|
|
OPTIMUM FILM THICKNESS |
Wet 60 microns Dry 30 microns |
|
| THEORETICAL COVERAGE | 63.2 m2 /Gal 16.7 m2/L 16.5 m2/Kg |
|
| OVERCOATING INTERVALS | Min. 4 hrs. Max. 6 months | |
|
MIXING RATIO |
Base : hardener = 85 : 15 (by wt.) |
|
| NON-VOLATILE CONTENTS | Above 55% (mixture) | |
|
POT LIFE |
3 hrs. (mixture, 25 |
|
|
THINNER |
No.736 Polyurethane Thinner |
|
|
THINNING RATE |
10~25% (cleaning tools excluded) |
|
|
PRECEDING COATS |
No.1002 Epoxy Primer, White |
|
|
SUBSEQUENT COATS |
No.722 Polyurethane Clear Coating (N-Type) T200V Toplong Clear (Silicone Acrylic) No.5302F Yung Flon Clear Varnish |
|
| STORAGE SHELF LIFE | Minimum 1 year under normal storage conditions. | |
| APPLICATION METHOD | 1.Spray 2.Brush/Roller (only for hand-type) | |
|
NOTE |
1. Mix base and hardener according to the mixing ratio and stir thoroughly. 2. Adhered moisture, grease, dust on substrate must be removed thoroughly. 3. Please use special thinner for dilution to avoid causing bubbles or pinholes. 4. Hardener cover must be tightly closed to avoid reaction with moisture in air to form bubbles and gelation. 5. Mixture of base and hardener must be used up within pot life. 6. Strictly controlling application, not to exceed 50 microns per coat, to avoid bubbles formation. 7. All equipments must be cleaned immediately after use. 8. If change application method from airless spray to brush or roller, please advice our sales representative. 9. Avoid
applying paint in rainy or the moisture above 85% RH, otherwise the adhesion
will be affected by moisture of substrate and the paint film will be loss its
gloss. |
|
/L (mixture)
) 
℃) 
|
|
|
|
 |
|
|
|
