|
YUNG FLON CLEAR VARNISH |
|
|
PRODUCT NUMBER |
5302F |
|
TYPE |
A two-pack topcoat based on fluor polymer as resin along with non-yellowing polyisocyanate hardener. |
|
USES |
Topcoat for PVC, FRP to against with ultraviolet ray. |
|
CHARACTERISTICS |
1. It is one of the most up-to-date synthetic coating with excellent eathability, chemical and contamination resistance. 2. Durability are far much longer than many others general paints. 3. High glossy finish and smooth appearance 4. Tough film , excellent adhesion and resistance to abrasion |
|
GLOSS |
Above 70%t |
|
COLOR |
Clear |
| FLASH POINT | 20 ℃ (68 ℉) |
| WEIGHT | Above 0.85 kg/L |
| VISCOSITY | 50 - 70 KU (25 ℃ ) |
| DRYING TIME | Set-to-touch
30 mins. Dry hard 6 hrs. Full Dry 7 days (25℃ ) |
| OPTIMUM FILM THICKNESS | Wet 73 microns
 Dry 30  microns |
| OVERCOATING INTERVALS | Min. 12 hrs. Max. 6 months |
| THEORETICAL COVERAGE | 51.8 ㎡/Gal
13.7 ㎡/L 16.0 ㎡  /kg |
| MIXER RATE | Resin : Cure = 90 : 10 |
| NON-VOLATILE CONTENT | Above 35% |
| POT LIFE | 6 hrs. (25℃ ) |
| THINNER | 5400S |
| THINNING RATE | 15 - 30% |
| STORAGE SHELF LIFE | Minimum 1 year under normal storage conditions. |
| APPLICATION METHOD | Airless Spray, Brush. |
| NOTE | 1. Mix base and hardener according to mixing ratio and stir it thoroughly. 2. Adhered moisture, grease, dirt, rust and corrosive salts on substrate must be cleaned thoroughly 3. Specified thinner should be used to prevent bubble and pinhole. 4. Canister of hardener should be sealed after used to prevent cure from contacting moisture in the air and turn it into gelatin. 5. Mixture of base and cure has to use up within pot life. 6. Paint application must follow specified film thickness to prevent bubble from occurring. 7. All the equipment must be cleaned thoroughly after used |
|
|
|
|
 |
|
|
|
